Why Choose This Machine
Top air-suction automatic feeding — sheets feed without jams or double-feeds, which is the failure point on friction-feed and hand-fed laminators.
Hydraulic pressure with leverage boost and a Ø105 mm steel roller — pressure holds steady across the full 350 mm width, so film lays flat on thick and coated board instead of leaving bubbles and edge lift.
500 mm paper stack capacity — load a tall stack and leave it running, cutting the downtime that frequent reloading causes.
3,000 m film rolls on 1"–3" cores — far fewer film changes per shift, which matters on repeat production work.
Automatic separation, overlap and film breaking — sheets come out separated and overlapped so the next stage doesn't need manual sorting, and the machine stops itself instead of running film into the roller.
De-curling function built in — covers and card come off flat, without the curl that single-sided hot lamination normally leaves behind.
Compact 2600 × 684 × 1227 mm footprint — auto feed, lamination and collection sit in one line, so the machine takes up one run of floor space rather than three stations.
Steel roller reaches working temperature in about 10 minutes, with 60–120 °C control and light 2.5 A draw at 220–240 V.
Handles 125–400 gsm — the full range from light cover stock to heavy packaging board on one setting range.
8. Packing & Shipping
Standard export wooden case packaging, shipped as two crates.
Sea, air or express freight available to your port or door.
Laminating unit 1220 × 710 × 1100 mm, net weight 200 kg (gross 240 kg); paper collection unit 710 × 600 × 950 mm, 20 kg.
Machine dimensions 2600 × 684 × 1227 mm — allow roughly 3 m of linear floor space for operation.
9. After-Sales & Support
Every unit is tested before shipment, with a machinery test report and outgoing inspection video provided.
12-month warranty with spare parts supply.
Online technical support directly from factory technicians, plus user manual and operation guide.
